Enterasys – The best way to Set up Transfer Firmware? – Generation Device Heart

On this article, we can see find out how to set up new firmware on Enterasys switches whose device is broken or now not attached by way of the serial port.

Let’s say first, Enterasys used to be bought by means of the Excessive Community . Subsequently, technical make stronger is now equipped by means of Excessive Community.

Earlier than beginning the processes, we will obtain the specified firmware device within the hyperlink under and make the essential club processes and obtain it from right here.


Within the means described right here, the essential set up will likely be made the use of COM PORT the use of XMODEM . You’ll be able to follow what’s described on this article on C5-Collection , C3-Collection , C2-Collection , B5-Collection , B3-Collection , B2-Collection , A4-Collection , A2-Collection switches and get effects.

When you wouldn’t have the {hardware} same old console cable and the interior COM port, a USB-rs232 converter is needed. Tera Time period , which is a device that I can switch to device, will see our paintings extra.

First, obtain the Tera Time period software and set up it to your laptop. Then, attach it in your laptop from the console connection of the transfer with the USB com converter.

Open the Tera Time period software and make a choice Serial from the New connection window that comes up and selects the corresponding COM port from the Port segment.


After this procedure, energize the Transfer and watch for it to open from the Tera Time period program. When the next menu is displayed, write “2” and press input. When you lose time and leave out this menu, energy off the transfer and repeat the similar procedure.

Because the “ Get started Boot Menu ” is device working outdoor of the running device, even supposing the device crashes, this menu will come on boot, so this menu works independently from the device.

While you input the boot menu, you are going to see the above choices. Right here, we can building up the verbal exchange pace to complete our transactions rapid.

For this procedure;

Settling on the above choice, press 2 to proceed with getting into.

Make a selection the “ 8- 115200 ” choice from this menu and press Y because of this sure.

Our Transfer, which used to be later actively attached with Tera Time period, does now not paintings in the beginning as a result of 9600 Bounds it used to be to begin with decided on. Now we can regulate the settings of the applying as you spot within the image under

Tera Time period

Setup -> Serial Port…

Trade the Sure charge worth to 115200 within the window that opens.

tera-term seri Port Setup-Bound rate
tera-term Seri Port Setup-Sure charge

Let’s proceed by means of urgent the “ Good enough ” button.

While you go back to the console display, press the Direct 4 key since you are already within the boot menu. By way of urgent the Four buttons, we can make a choice the next choice.

Subsequent got here the XMODEM protocol to obtain the firmware record.

Make a selection the next menu in Tera Time period Utility

Report-> TRANSFER> XMODEM-> syndrome have an> Browse-> Open

Make a selection the firmware record within the window that opens. You are going to see the method carried out as under.


The add might take a bit longer. Subsequently, don’t attempt to prevent the method.

When completed, set the sure charge to 9600 and restart the transfer. The transfer will likely be opened with the brand new firmware.

As well as, if you wish to delete the entirety from a transfer you forgot your password in case you input the boot menu and use the choice “ 10 - Repair Configuration to manufacturing unit defaults (delete config recordsdata) “, you are going to delete all Configuration settings.

I’m hoping it used to be an invaluable article.

perspectives 183

Leave a Reply

Your email address will not be published. Required fields are marked *